 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| UV paint |
UV paint YGLUE™G-1001
DESCRIPTION: YGLUE™G-1001 is low viscosity, single component, ultra-curing coating, having the low toxicity. After the solidification the paint film has the good adhesive power, the flexibility. It is suitable in the inductance coil and electronic vitality painting.
SURFACE PREPARATION: Ensure the surface preparations, and that the surface is clean and dry, free from dust, perfect degreasing. It is best that first chemical treatment, then coating, so can capture best adhesion.
APPEARANCE
YGLUE™G-1001
COLOR Clear --- brings yellow
VISCOSITY(25℃, cps) 890±120cps
SPECIFIC GRAVITY(25℃) 1.1±0.1
STORAGE LIFE (25℃,avoid lighting) 6 months
CHARACTER:
1. low viscosity, low toxic
2. electric insulation is good, the properties of thermal stability, bearing the solubility and bearing the drugs are all excellent.
3. good to mix colors willfully
CURING CONDITION: Full curing time, depending upon the intensity of UV light, lowest curing time as follow list:
INTENSITY CURING TIME
1.0KW 25~30 seconds
3.0KW 15~20 seconds
PROPERTIES
Volume resistivity 25 ℃ Ohm-cm 6.8 *1015
Surface resistivity 25 ℃ Ohm 1.2* 1014
Dielectric strength 25 ℃ Kv/mm 17
Impact strength kg/cm/cm2 5~7
thermal deformation temperature ℃ 100
Water absorption %24h <0.1
CLEAN UP: Clean all tools and equipment at the end of each days work with organic solvent.
CLEANNESS & MAINTENANCE: Only use commonly cleaning method, e.g. mull dip in clear water, and do not use grinding cleaning tools. Had better not use organic solvent as detergent.
PACKING & STORAGE: YGLUE™G-1001 all act 4 kilograms per pot; 24 kilograms each box, 6 months in an unopened can, kept in cool dry storage. Seal up for keeping after open the cover as early as possible.
NOTE： Prevent shake, blow, and ensure surface level up. It is best that be forced after cured 12 hours. Curing at room temperature and dampness, the surface easy display fog
HEALTH & SAFETY：Avoid swallowing. Wear suitable gloves and eye protection. As the YGLUE™G-1001 is solvent free, it is relatively non-toxic and it is non-flammable. Spills can be removed by cloth or by using sand to absorb the glue. Once dry the product no longer dissolves in organic solvent. Remove from skin before glue dries.
TECHNICAL ADVICE： Please contact KINGYORK (Tel: 0086-20-82377171, Fax: 0086-20-82399962, EMAIL: sales@kingyork.com) Updated 2003/8/1 |
