Register Now
 

   
   
 
General epoxy adhesive

YGLUE ™211A/B

 
DESCRIPTION: YGLUE™211A/B is solvent free, liquid epoxy, which is fast curable at room temperature(low to 5℃). It always be used in sticking metal, jewelry and crystal, it always do for the same or the different kind of materials. The product after curing has excellent adhesion, high hardness, shockproof, good flexibility, good chemical resistance.
 
RECOMMEND USAGE: YGLUE™211A/B suit for all need to sticking electrons or other kinds of products are used; Not suitable for the adhere of the flexible or soft outer cover products.
 
SURFACE PREPARATION: Ensure the surface preparations, and that the surface is clean and dry, free from dust, perfect degreasing. It is best that first chemical treatment, then coating, so can capture best adhesion.
 
APPEARANCE & CHARACTER:
                  YGLUE™211A                      YGLUE™211B
COLOR                                     clear                                     straw yellow
VISCOSITY(25℃, cps)              12000-15000                         5600-7500
SPECIFIC GRAVITY(25℃)          1.20                                       0.92
FLASH  POINT(℃)                     210                                       >240
 
MIX RATIO:                                   YGLUE™200A                       YGLUE™200B
Volume ratio                                  100                                           80
Weight ratio                                  100                                           100
 
POT LIFE: Pot life of mixing YGLUE™211A and YGLUE™211B , depending upon mixing total weight and operating temperature, generally 100g mixing weight, approximately 10 minutes at 25℃.
 
CURING CONDITION: Full curing time, depending upon curing temperature, lowest curing time as follow list:
TEMPERATURE                                                CURING TIME
25℃                                                                  30    minutes
70℃                                                                  3-4  minutes
 
PROPERTIES
Volume resistivity 25 ℃             Ohm-cm              1.35 *10 15
Surface resistivity 25 ℃             Ohm                   1.2* 10 14
Dielectric strength 25 ℃             Kv/mm               16~18
Compressive strength                kg/mm                16
Tensile strength                         kg/mm2                  12
Hardness                                 SHORE-D               85-90
thermal deformation temperature     ℃                    100-120
Water absorption                         %24h                   <0.1
 
RECOMMEND TECHNIC: SURFACE PREPARATION→BASEBOARD PREHEATING (50-60℃) →GLUE MIXING→PROOFING →VACUUM DEFOAMING→CURING
 
CLEAN UP: Clean all tools and equipment at the end of each days work with organic solvent.
 
CLEANNESS & MAINTENANCE: Only use commonly cleaning method, e.g. mull dip in clear water, and do not use grinding cleaning tools. Had better not use organic solvent as detergent.
 
PACKING & STORAGE: YGLUE211A/B all act 1kg per tank.2kgs per set. 6 months in an unopened can, kept in cool dry storage. Seal up for keeping after open the cover as early as possible.
 
NOTE Ratio must be just. For accelerating at room temperature, can heating baseboard with electric hot plate. Prevent shake, blow, and ensure surface level up. It is best that be forced after cured 12 hours. Curing at room temperature and dampness, the surface easy display fog, suggest curing at heated.
 
HEALTH & SAFETYAvoid swallowing. Wear suitable gloves and eye protection. As the YGLUE™211A/B is solvent free, it is relatively non-toxic and it is non-flammable. Spills can be removed by cloth or by using sand to absorb the glue. Once dry the product no longer dissolves in organic solvent. Remove from skin before glue dries.
 
TECHNICAL ADVICE: Please contact KINGYORK (Tel: 0086-20-82377171,   Fax: 0086-20- 82399962, EMAIL: EPOTEX@21CN.COM).
       Updated 2003/8/1
   

 
Copyright © 2006 Guangzhou Kingyork New Materials Company. Tel:020-82381150 sales@kingyork.com Technic supported by:www.51kang.com