 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Polish glue |
YglueTM666A/BDESCRIPTION: YGLUE™666A/B is a no-solvent, low viscosity, special transparent liquid resin system, which is curing at room temperature or aggregated temperature. The product after curing is soft, which has excellent gloss surface, good transparency, high hardness, excellent adhesion and electric property. It can resist water, damp and good chemical resistance, also color stability outstanding. It can also be added color paste to make it colorful.
RECOMMEND USAGE: YGLUE™666A/B is suitable for the surface of hardware handicrafts, such as belt clamp, drawer handle, shaking hands, looks frame , the shoes flower, the metal data plate, the badge, the button, the metal toy, each kind imitate enamel product
SURFACE PREPARATION: Ensure the surface preparations, and that the surface is clean and dry, free from dust, perfect degreasing. It is best that first chemical treatment, then coating, so can capture best adhesion.
APPEARANCE & CHARACTER:
YGLUE™666A YGLUE™666B
COLOR brings yellow Clear
VISCOSITY(25℃, cps) 920-970 30-40
SPECIFIC GRAVITY(25℃) >140 121
SPECIFIC GRAVITY(25℃) 1.12±0.01 0.94±0.01
MIX RATIO: YGLUE™666A YGLUE™666B
Weight ratio 3 1
(the
POT LIFE: Pot life of mixing YGLUE™666A and YGLUE™666B , depending upon mixing total weight and operating temperature, generally 100g mixing weight, approximately 30 minutes at 25℃.
CURING CONDITION: Full curing time, depending upon curing temperature, lowest curing time as follow list:
TEMPERATURE CURING TIME
60℃ * 30 minutes and 80℃ * 60 minutes (if possible ,can continue curing 30 minutes at 100℃)
POLISHING AND THROWING:
Polishing: After the solidification, the glue line surface is quite smooth , so can use the high number sandpaper to polish it smooth. The sandpaper serial number is bigger than 800#, better bigger than 1000#, because the sandpaper serial number under 800# Can leave deep trace, affects following working procedure.
Throwing: At present the factory generally with the cloth, the skin, the wool and so on throws the compact disc. May act according to respective situation to select. In principle the material is solid, is careful, best to use flannelette plate. The polishing wax choice is extremely important, the polishing resin, the plastic, the red wax and the white wax used in plexus-glass are all possible. If uses the abrasive, the effect is better, the abrasive influential have several kinds of the thick and the force. If the first step using sandpaper above 1000, it is better to use the force abrasive; if using the sandpaper under 800, then needs the thick abrasive to eliminate the trace, again uses force abrasive polishing
RECOMMEND TECHNIC: SURFACE PREPARATION→BASEBOARD PREHEATING (50-60℃) →GLUE MIXING→PROOFING →VACUUM DEFOAMING→CURING
CLEAN UP: Clean all tools and equipment at the end of each days work with organic solvent.
CLEANNESS & MAINTENANCE: Only use commonly cleaning method, e.g. mull dip in clear water, and do not use grinding cleaning tools. Had better not use organic solvent as detergent.
PACKING & STORAGE: YGLUE™666A/B all act 20 kilograms per set. 6 months in an unopened can, kept in cool dry storage. Seal up for keeping after open the cover as early as possible.
NOTE： Ratio must be just. For accelerating at room temperature, can heating baseboard with electric hot plate. Prevent shake, blow, and ensure surface level up. It is best that be forced after cured 12 hours. Curing at room temperature and dampness, the surface easy display fog, suggest curing at heated.
HEALTH & SAFETY：Avoid swallowing. Wear suitable gloves and eye protection. As the YGLUE™666A/B is solvent free, it is relatively non-toxic and it is non-flammable. Spills can be removed by cloth or by using sand to absorb the glue. Once dry the product no longer dissolves in organic solvent. Remove from skin before glue dries.
TECHNICAL ADVICE： Please contact KINGYORK (Tel: 0086-20-82377171, Fax: 0086-20-82399962, EMAIL: EPOTEX@21CN.COM).
Updated 2003/8/1 YglueTM668A/B |
