YGLUE™628A/B
DESCRIPTION: YGLUE™628A/B is a special liquid resin system, which is curing at room temperature. The product after curing has excellent gloss surface, good transparency, high hardness, excellent adhesion and electric property. It can resist water, damp and good chemical resistance. It can also be added color paste to makeit colorful.
RECOMMEND USAGE: YGLUE™628A/B is suitable for the surface encapsulation of products, such as various kinds of metal signs, product label , badge, button, handicraft and other hard texture products.
SURFACE PREPARATION: Ensure the surface preparations, and that the surface is clean and dry, free from dust, perfect degreasing. It is best that first chemical treatment, then coating, so can capture best adhesion.
APPEARANCE & CHARACTER:
YGLUE™628A YGLUE™628B
COLOR Clear Clear
VISCOSITY(25℃, cps) 700-800 45
SPECIFIC GRAVITY(25℃) 1.12±0.01 0.94±0.01
FLASH POINT(℃) >120 121
YGLUE™626A YGLUE™626B
Weight ratio 2 1
POT LIFE: Pot life of mixing YGLUE™628A and YGLUE™628B , depending upon mixing total weight and operating temperature, generally 100g mixing weight, approximately 35 minutes at 25℃.
CURING CONDITION: Full curing time, depending upon curing temperature, lowest curing time as follow list:
TEMPERATURE CURING TIME
25℃ 8-10 hours
60℃-80℃ 1 hour
PROPERTIES:
Volume resistivity 25 ℃ Ohm-cm 1.35 *10 15
Surface resistivity 25 ℃ Ohm 1.2* 10 14
Dielectric strength 25 ℃ Kv/mm 16~18
Compressive strength kg/mm2 16
Tensile strength kg/mm2 12
Hardness SHORE-D 80-85
thermal deformation temperature ℃ 100
Water absorption %24h <0.1
RECOMMEND TECHNIC: SURFACE PREPARATION→BASEBOARD PREHEATING (50-60℃) →GLUE MIXING→PROOFING →VACUUM DEFOAMING→CURING
CLEAN UP: Clean all tools and equipment at the end of each days work with organic solvent.
CLEANNESS & MAINTENANCE: Only use commonly cleaning method, e.g. mull dip in clear water, and do not use grinding cleaning tools. Had better not use organic solvent as detergent.
PACKING & STORAGE: YGLUE™628A/B all act 15 kilograms per set. 6 months in an unopened can, kept in cool dry storage. Seal up for keeping after open the cover as early as possible.
NOTE： Ratio must be just. For accelerating at room temperature, can heating baseboard with electric hot plate. Prevent shake, blow, and ensure surface level up. It is best that be forced after cured 12 hours. Curing at room temperature and dampness, the surface easy display fog, suggest curing at heated.
HEALTH & SAFETY：Avoid swallowing. Wear suitable gloves and eye protection. As the YGLUE™628A/B is solvent free, it is relatively non-toxic and it is non-flammable. Spills can be removed by cloth or by using sand to absorb the glue. Once dry the product no longer dissolves in organic solvent. Remove from skin before glue dries.
TECHNICAL ADVICE： Please contact KINGYORK (Tel: 0086-20-82377171, Fax: 0086-20-82399962, EMAIL: EPOTEX@21CN.COM).
Updated 2003/8/1
YGLUE™5201A/B
DESCRIPTION: YGLUE™5201A/B is a special liquid resin system, which is curing at room temperature. The product after curing has excellent gloss surface, good transparency, high hardness, excellent adhesion and electric property. It can resist water, damp and good chemical resistance. It can also be added color paste to make it colorful.
RECOMMEND USAGE: YGLUE™5201A/B is suitable for the sealing of electronics , especially for LED.
SURFACE PREPARATION: Ensure the surface preparations, and that the surface is clean and dry, free from dust, perfect degreasing. It is best that first chemical treatment, then coating, so can capture best adhesion.
APPEARANCE & CHARACTER:
YGLUE™5201A YGLUE™5201B
COLOR Clear Clear
VISCOSITY(25℃, cps) 700-800 45
FLASH POINT(℃) >140 >140
MIX RATIO: YGLUE™5201A YGLUE™5201B
Weight ratio 2 1
POT LIFE: Pot life of mixing YGLUE™5201A and YGLUE™5201B , depending upon mixing total weight and operating temperature, generally 100g mixing weight, approximately 35 minutes at 25℃.
CURING CONDITION: Full curing time, depending upon curing temperature, lowest curing time as follow list:
TEMPERATURE CURING TIME
25℃ 8-10 hours
60℃-80℃ 50-60 minutes
PROPERTIES
Volume resistivity 25 ℃ Ohm-cm 1.6 *10 16
Surface resistivity 25 ℃ Ohm 1.4* 10 15
Dielectric strength 25 ℃ Kv/mm 16~18
Compressive strength kg/mm2 8.4
Tensile strength kg/mm2 5-8
Hardness SHORE-D 78-85
thermal deformation temperature ℃ 100
Water absorption %24h <0.14
RECOMMEND TECHNIC: SURFACE PREPARATION→BASEBOARD PREHEATING (50-60℃) →GLUE MIXING→PROOFING →VACUUM DEFOAMING→CURING
CLEAN UP: Clean all tools and equipment at the end of each days work with organic solvent.
CLEANNESS & MAINTENANCE: Only use commonly cleaning method, e.g. mull dip in clear water, and do not use grinding cleaning tools. Had better not use organic solvent as detergent.
PACKING & STORAGE: YGLUE5201A/B all act 15 kilograms per set. 6 months in an unopened can, kept in cool dry storage. Seal up for keeping after open the cover as early as possible.
NOTE： Ratio must be just. For accelerating at room temperature, can heating baseboard with electric hot plate. Prevent shake, blow, and ensure surface level up. It is best that be forced after cured 12 hours. Curing at room temperature and dampness, the surface easy display fog, suggest curing at heated.
HEALTH & SAFETY：Avoid swallowing. Wear suitable gloves and eye protection. As the YGLUE™628A/B is solvent free, it is relatively non-toxic and it is non-flammable. Spills can be removed by cloth or by using sand to absorb the glue. Once dry the product no longer dissolves in organic solvent. Remove from skin before glue dries.
TECHNICAL ADVICE： Please contact KINGYORK (Tel: 0086-20-82377171, Fax: 0086-20-82399962, EMAIL: EPOTEX@21CN.COM).
Updated 2003/8/1
YGLUE™5411A/B-W
DESCRIPTION: YGLUE™5411A/B-W is a special liquid resin system, which is used in electronic sealing. It is composed of electric filler, living diluents and super additives. Cured product has excellence gloss surface, similarity agate, its hardness, electric property , inflaming retarding are also very good.
RECOMMEND USAGE: YGLUE™5411A/B-W suit for the all need to sealing, encapsulation, insulating and damp-proof electrons or other kinds of products, especially for the sealing of electromagnetically operated valve.
SURFACE PREPARATION: Ensure the surface preparations, and that the surface is clean and dry, free from dust, perfect degreasing. It is best that first chemical treatment, then coating, so can capture best adhesion.
APPEARANCE & CHARACTER:
YGLUE™5411A-W YGLUE™5411B-W
COLOR white clear
VISCOSITY(25℃, cps) 1700-2000 30-100
SPECIFIC GRAVITY(25℃) 1.5-1.6 1.02
FLASH POINT(℃) 210 >240
MIX RATIO: YGLUE™5411A-W YGLUE™5411B-W
Weight ratio 4 1
POT LIFE: Pot life of mixing YGLUE™5411A-W and YGLUE™5411B-W , depending upon mixing total weight and operating temperature, generally 100g mixing weight, approximately 50 minutes at 25℃.
CURING CONDITION: Full curing time, depending upon curing temperature, lowest curing time as follow list:
TEMPERATURE CURING TIME
25℃ 8-10 hours
60℃ 90 minutes
80℃(just) 60 minutes
PROPERTIES
Volume resistivity 25 ℃ Ohm-cm >1014
Surface resistivity 25 ℃ Ohm >1010
Dielectric strength 25 ℃ Kv/mm 16
Dielectric constant 1KHZ 4.2
Flexural strength kg/mm2 8-10
Impact strength kg/mm2 5-8
Hardness SHORE-D 82
thermal deformation temperature ℃ 80
Water absorption %24h <0.14
Volume shrinkage % 0.26
inflaming retarding UL94 V-0
RECOMMEND TECHNIC: SURFACE PREPARATION→BASEBOARD PREHEATING (50-60℃) →GLUE MIXING→PROOFING →VACUUM DEFOAMING→CURING
CLEAN UP: Clean all tools and equipment at the end of each days work with organic solvent.
CLEANNESS & MAINTENANCE: Only use commonly cleaning method, e.g. mull dip in clear water, and do not use grinding cleaning tools. Had better not use organic solvent as detergent.
PACKING & STORAGE: YGLUE™5411A/B-W all act 30 kilograms per set. 6 months in an unopened can, kept in cool dry storage. Seal up for keeping after open the cover as early as possible.
NOTE： Ratio must be just. For accelerating at room temperature, can heating baseboard with electric hot plate. Prevent shake, blow, and ensure surface level up. It is best that be forced after cured 12 hours. Curing at room temperature and dampness, the surface easy display fog, suggest curing at heated.
HEALTH & SAFETY：Avoid swallowing. Wear suitable gloves and eye protection. As the YGLUE™5411A/B-W is solvent free, it is relatively non-toxic and it is non-flammable. Spills can be removed by cloth or by using sand to absorb the glue. Once dry the product no longer dissolves in organic solvent. Remove from skin before glue dries.
TECHNICAL ADVICE： Please contact KINGYORK (Tel: 0086-20-82377171, Fax: 0086-20-82399962, EMAIL: EPOTEX@21CN.COM).
Updated 2003/8/1
YGLUE™211A/B
DESCRIPTION: YGLUE™211A/B is solvent free, liquid epoxy, which is fast curable at room temperature(minimum of 5℃ ). It always be used in sticking metal, jewelry and crystal, it always do for the same or the different kind of materials. The product after curing has excellent adhesion, high hardness, shockproof, good flexibility, good chemical resistance.
RECOMMEND USAGE: YGLUE™211A/B suit for all need to sticking electrons or other kinds of products are used; Not suitable for the adhere of the flexible or soft outer cover products.
SURFACE PREPARATION: Ensure the surface preparations, and that the surface is clean and dry, free from dust, perfect degreasing. It is best that first chemical treatment, then coating, so can capture best adhesion.
APPEARANCE & CHARACTER:
YGLUE™211A YGLUE™211B
COLOR clear straw yellow
VISCOSITY(25℃, cps) 12000-15000 5600-7500
SPECIFIC GRAVITY(25℃) 1.20 0.92
FLASH POINT(℃) 210 >240
MIX RATIO: YGLUE™200A YGLUE™200B
Volume ratio 100 80
Weight ratio 100 100
POT LIFE: Pot life of mixing YGLUE™211A and YGLUE™211B , depending upon mixing total weight and operating temperature, generally 100g mixing weight, approximately 10 minutes at 25℃.
CURING CONDITION: Full curing time, depending upon curing temperature, lowest curing time as follow list:
TEMPERATURE CURING TIME
25℃ 30 minutes
70℃ 3-4 minutes
PROPERTIES
Volume resistivity 25 ℃ Ohm-cm 1.35 *10 15
Surface resistivity 25 ℃ Ohm 1.2* 10 14
Dielectric strength 25 ℃ Kv/mm 16~18
Compressive strength kg/mm2 16
Tensile strength kg/mm2 12
Hardness SHORE-D 85-90
thermal deformation temperature ℃ 100-120
Water absorption %24h <0.1
RECOMMEND TECHNIC: SURFACE PREPARATION→BASEBOARD PREHEATING (50-60℃) →GLUE MIXING→PROOFING →VACUUM DEFOAMING→CURING
CLEAN UP: Clean all tools and equipment at the end of each days work with organic solvent.
CLEANNESS & MAINTENANCE: Only use commonly cleaning method, e.g. mull dip in clear water, and do not use grinding cleaning tools. Had better not use organic solvent as detergent.
PACKING & STORAGE: YGLUE™211A/B all act 1kg per tank.2kgs per set. 6 months in an unopened can, kept in cool dry storage. Seal up for keeping after open the cover as early as possible.
NOTE： Ratio must be just. For accelerating at room temperature, can heating baseboard with electric hot plate. Prevent shake, blow, and ensure surface level up. It is best that be forced after cured 12 hours. Curing at room temperature and dampness, the surface easy display fog, suggest curing at heated.
HEALTH & SAFETY：Avoid swallowing. Wear suitable gloves and eye protection. As the YGLUE™211A/B is solvent free, it is relatively non-toxic and it is non-flammable. Spills can be removed by cloth or by using sand to absorb the glue. Once dry the product no longer dissolves in organic solvent. Remove from skin before glue dries.
TECHNICAL ADVICE: Please contact KINGYORK (Tel: 0086-20-82377171, Fax: 0086-20- 82399962, EMAIL: EPOTEX@21CN.COM).
|
